Every traditional foam filled up hot tub cover gets heavy. However the just how and also why could come as a shock. It has nothing to do with rainfall so it matters not exactly how high the taper is, that cover will certainly still obtain heavy. If it was rain that was making Hot Tub Covers heavy then putting a roof covering over the spa would certainly prohibit the cover from growing heavy.

Moisture getting caught in the foam is exactly what ultimately makes a cover to heavy to raise. But if it’s not the rain, exactly how does the water act? The response is heavy steam from the warm spa water. When water becomes vapor it is a much smaller molecule than a drop of water.

Vapor could enter a much smaller sized area, like say the tiny spaces in the foam. Once it cools and becomes water once again, it’s caught inside the foam. When entraped in the foam the water will not drain out so a fancy drain hole will not make any difference. The only means the water could come back out of the foam would be to evaporate. In order to evaporate, the hot tub cover would certainly need to be removed from the source of steam (the hot tub) as well as put in a dry, well aerated area.

The trouble has nothing to do with how well the cover is looked after or just how much vinyl protector is massaged on it. The problem is the foam. The sort of foam used in hot tub covers is developed to be used as insulation in COMPLETELY DRY conditions. For example it functions well in floors, wall surfaces and also ceilings (offered it is maintained completely dry) and is wonderful for refrigeration applications.

However if the exact same foam is revealed to steam, the insulation it can use is promptly reduced to something equal to damp plywood.

So why is foam still being utilized in Hot Tub Covers? It economicals as well as it’s the industry standard. But even if everyone is doing it does not make it the most effective concept.

A hundred years ago the standard mode of travel was the steed. The steed had been the criterion for centuries. Up until something much better occurred.

A better concept as far as Hot Tub Covers go would certainly be one that removes the foam, still protects but remains lightweight and also easy to use.

Thirty years back, (yes truly, thirty years ago) that is how the SpaCap.com was established. A single woman with back difficulty, had to have the ability to utilize her hot tub everyday for treatment. She needed to be able to get her cover off and on by herself without further wounding her back.

The cover she eventually came up with was light weight, easy to use as well as shielded as well as a foam loaded hot tub cover. Although it has actually experienced many renovations for many years, the principle and also principle is still the same. SpaCap.com develops custom Hot Tub Covers for all type of spas including swim Spa Covers

Do not head out as well as acquisition another foam loaded hot tub cover even if that’s what the neighbors do. Check out SpaCap.com and also get a cover that will not get hefty or break and will certainly make it simple for you to utilize your spa for many years to find!